Hoenle ElecoUV curing
Vitralit 6128
1K modified acrylate, UV cure with heat or chemical post-cure (activator)
UV acrylate with secondary heat or activator cure for areas the light cannot reach.
Technical data
| Viscosity | 800–1.200 mPa·s |
|---|---|
| Hardness | Shore D 70–80 |
| Service temperature | −40 a +150 °C |
| Tensile / elongation | 30–38 MPa / 5–8 % |
| Shear strength | vidrio/inox 15–20 MPa; vidrio/Al 12–18 MPa |
| Cure | UV-A 60 mW/cm² 1 mm 15 s; LED 365 nm 300 mW/cm² 0,5 mm 10 s |
| Secondary cure | 120 °C/40 min or chemical with activator 25 min |
| Storage | ≤25 °C; ≥6 months on delivery, max. 12 |
Recommended for: UV-cure bonding
Need the technical data sheet (TDS) and safety data sheet (SDS)?
Send us your enquiry and we will send you the latest versions, together with a technical expert's recommendation.
Send us your enquiry and we will send you the latest versions, together with a technical expert's recommendation.