Structural bonding

Vibra-TITE

Vibra-TITE AL 6070 Low Odour

Low-odour 2K 1:1 methacrylate

Clear, low-odour structural methacrylate for metals, plastics and composites.

Plexus

Plexus MA8110

2K MMA, 1:1 mix

High-toughness, low-odour 1:1 methacrylate; bonds unprimed metals, composites and plastics.

Vibra-TITE

Vibra-TITE AT 1740 PP/PE

2K 10:1 methacrylate for polyolefins

Structural bonding of PE and PP without pretreatment.

On PE and PP, always run a preliminary test on your part: depending on the material, it may need pretreatment.

Kömmerling

Körapur 666/90

Solvent-free 2K polyurethane, cures at room T° regardless of humidity

Thixotropic 2K PU for wood, aluminium, rigid PVC, FRP and foams; moisture resistant.

Kömmerling

Körapur 790/30

Solvent-free 2K polyurethane, cures at room T° regardless of humidity

Solvent- and plasticiser-free 2K PU for metals, foams and plastics; cartridge for standard gun.

Kömmerling

Körapox 735

Fast-curing 2K epoxy

Fast-curing 2K epoxy for glass, ceramics, stone, metal and electronics.

Plexus

Plexus MA830

2K MMA, 10:1 mix

Fast-curing 10:1 methacrylate that bonds aluminium without primer.

Plexus

Plexus MA8105 GB

2K MMA, 1:1 mix

Fast-curing 1:1 methacrylate for galvanised steel, coated metal and difficult plastics.

Plexus

Plexus MA560-1

2K MMA, 1:1 mix

Very long open time 1:1 methacrylate for large composite joints (FRP, gelcoat).

Plexus

Plexus MA420

2K MMA, 10:1 mix

Fast-curing 10:1 methacrylate; Plexus's preferred option for bonding EPDM.

Plexus

Plexus MA3940LH

2K MMA, 10:1 mix

Very fast-curing 10:1 methacrylate for stress-crack-sensitive plastics such as polycarbonate or acrylic.

Cyberbond (legacy)

Cyberbond AL 6026

Modified acrylate / 2K methacrylate

Very fast-curing 2K 1:1 MMA (A pink / B light green) for plastics and metals.

Use: Structural bonding

Cyberbond (legacy)

Cyberbond AL 6080

Modified acrylate / 2K methacrylate

Very fast-curing 2K 1:1 MMA (A clear / B blue), high elongation.

Use: Structural bonding

Cyberbond (legacy)

Cyberbond AT 1727

Modified acrylate / 2K methacrylate

White long pot life 2K 1:1 MMA for polycarbonate and metals.

Use: Structural bonding

H.B. Fuller

MP55300

2K 1:1 structural methacrylate

1:1 structural MMA for metals, composites and thermoplastics (US data sheet).

Use: Structural bonding

Kömmerling

Körapur 672 S / 672

Solvent-free 2K polyurethane, cures at room T° regardless of humidity

Self-levelling multi-purpose 2K PU, applied by spatula and roller, with high moisture resistance and IMO and EN 45545 approvals.

Use: Structural bonding

Kömmerling

Körapur 672 NV

Solvent-free 2K polyurethane, cures at room T° regardless of humidity

Very low viscosity version of Körapur 672 for potting; proposed for potting/coating heat exchangers.

Use: Structural bonding

Kömmerling

Körapur 648

Solvent-free 2K polyurethane, cures at room T° regardless of humidity

Thixotropic low-viscosity 2K PU with long pot life, also suitable for potting.

Use: Structural bonding

Kömmerling

Körapur 784

Solvent-free 2K polyurethane, cures at room T° regardless of humidity

High mechanical performance 2K PU, 1:1 by volume and no significant shrinkage; short times, repair-oriented.

Use: Structural bonding

Kömmerling

Körapur 840

Solvent-free 2K polyurethane, cures at room T° regardless of humidity

High-impact, thixotropic, slightly flexible 2K PU in tandem cartridge; IMO.

Use: Structural bonding

Kömmerling

Körapur 842

Solvent-free 2K polyurethane, cures at room T° regardless of humidity

High-impact 2K PU with high flexibility even at low temperature.

Use: Structural bonding

Kömmerling

Körapur 489

Elastic 2K polyurethane, 10:1 by volume

High-strength elastic 2K PU with high flexibility at low temperature, plasticiser-free.

Use: Structural bonding

Kömmerling

Köracur TH 650

Isocyanate hardener (component B) for 2K structural PU

Hardener for Körapur 2K systems (666, 672, 540, 560, 620, 840…), supplied in its own pack sizes.

Use: Structural bonding

Kömmerling

Körapur 540

2K polyurethane

Pourable elastic 2K PU for filtration/potting on metals and pretreated plastics.

Use: Structural bonding

Kömmerling

Körapur 560

2K polyurethane

Very fast-curing 2K PU for filters and potting plastics.

Use: Structural bonding

Kömmerling

Körapur 620

2K polyurethane

Pourable semi-structural 2K PU for metals, pretreated plastics and paper.

Use: Structural bonding

Swift

Swiftbond 2701

2K polyurethane

2K PU with Swifthardener 9532 hardener.

Use: Structural bonding

Kömmerling

Isamet R 8268

2K epoxy

High-viscosity pink epoxy with excellent chemical and weather resistance and electrical insulation; very good adhesion to metal.

Use: Structural bonding

Kömmerling

Isamet R 8278

2K epoxy

High-viscosity pink epoxy with very long open time and excellent chemical resistance and insulation.

Use: Structural bonding

Swift

Swiftbond 9163 N

2K epoxy, cures at room T°

Low-viscosity beige epoxy with medium open time.

Use: Structural bonding

Swift

Swiftbond 9162 D

2K epoxy

2K epoxy for brush making (natural/synthetic bristles in metal, plastic or wood).

Use: Structural bonding

Bacon / Fiber Resin (H.B. Fuller Aerospace)

EY2536

Aerospace epoxy

Aerospace epoxy from the Bacon/Fuller range: edge fill / structural, fire-retardant.

Use: Structural bonding

Bacon / Fiber Resin (H.B. Fuller Aerospace)

EY2562

Aerospace epoxy

Aerospace epoxy from the Bacon/Fuller range: fire-retardant insert potting, pourable lightweight.

Use: Structural bonding

Bacon / Fiber Resin (H.B. Fuller Aerospace)

EY3010

Aerospace epoxy

Aerospace epoxy from the Bacon/Fuller range: core fill / structural, fire-retardant, NASA low volatiles.

Use: Structural bonding

Bacon / Fiber Resin (H.B. Fuller Aerospace)

EY3804

Aerospace epoxy

Aerospace epoxy from the Bacon/Fuller range: field repair of composites.

Use: Structural bonding

Bacon / Fiber Resin (H.B. Fuller Aerospace)

EY4014

Aerospace epoxy

Aerospace epoxy from the Bacon/Fuller range: structural metal/composite/coatings/plastics, 100 % reactive.

Use: Structural bonding

Bacon / Fiber Resin (H.B. Fuller Aerospace)

FD4120S

Aerospace epoxy

Aerospace epoxy from the Bacon/Fuller range: epoxy-polysulphide hybrid, gap filling.

Use: Structural bonding

Bacon / Fiber Resin (H.B. Fuller Aerospace)

FE0004

Aerospace epoxy

Aerospace epoxy from the Bacon/Fuller range: high-integrity general use, up to 180 °F.

Use: Structural bonding

Bacon / Fiber Resin (H.B. Fuller Aerospace)

FE6026

Aerospace epoxy

Aerospace epoxy from the Bacon/Fuller range: general use: metals, wood, coatings, ceramics, glass, plastics.

Use: Structural bonding

Bacon / Fiber Resin (H.B. Fuller Aerospace)

FE7004

Aerospace epoxy

Aerospace epoxy from the Bacon/Fuller range: very versatile, ratio adjustable from 1:1 (flexible) to 2:1 (rigid).

Use: Structural bonding

Structalit

Structalit 5802

2K epoxy, room-temperature/heat cure

Two-component epoxy for capacitor bonding, corner bonding and general structural bonding, with very good dielectric properties.

Use: Structural bonding

Structalit

Structalit 5803

2K epoxy, room-temperature/heat cure

High-Tg, impact-resistant two-component epoxy for bonding magnets in electric motors.

Use: Magnet bonding

Structalit

Structalit 5858

1K epoxy, heat cure

High-Tg, high-strength, impact-resistant one-component epoxy for bonding magnets.

Use: Magnet bonding

Structalit

Structalit 8801

1K epoxy, heat cure

Beige one-component epoxy with short low-temperature cure for structural bonding, magnets, glob top and sensor potting; highly resistant to oils, greases and media, low outgassing and low ionic content; ISO 10993-5.

Use: Structural bonding

Structalit

Structalit 3060-1

1K epoxy, heat cure

Very flexible, very fast-curing one-component epoxy for fixing and protecting SMD components, flexible electronics, wafer level bonding, encapsulation and lens bonding.

Use: Structural bonding

Structalit

Structalit 8838 T

Epoxy, heat cure

Highly flexible, stress-compensating, low-outgassing epoxy for LBA and lens bonding in automotive optical sensors.

Use: Lens bonding (thermal)

Structalit

Structalit 5512

Epoxy, heat cure

Connector bonding adhesive with low ionic content, high modulus and high elongation, resistant to vibration and shock, with excellent adhesion to LCP and PBT.

Use: Structural bonding

Structalit

Structalit 5521

Epoxy, heat cure

Low-modulus flexible adhesive for connectors with excellent adhesion to LCP and PBT, suited to temperature-sensitive substrates (cures from 60 °C).

Use: Structural bonding

Structalit

Structalit 5531

Epoxy, heat cure

Low-CTE adhesive for connectors with excellent adhesion to LCP and PBT, resistant to chemicals and vibration, for temperature-sensitive substrates.

Use: Structural bonding

Plexus

Plexus MA300

2K MMA, 1:1 mix

High-strength, low-viscosity, injectable two-component 1:1 methacrylate for small parts and repairs; on aluminium and stainless steel it requires PC120 conditioner.

Use: FRP/gelcoat/RTM composites and small repairs

Plexus

Plexus MA310

2K MMA, 1:1 mix

High-strength, high-stiffness 1:1 methacrylate with longer working time than MA300; injectable for repairs, on metals with PC120.

Use: FRP/gelcoat/RTM composites, injectable repairs

Plexus

Plexus MA320

2K MMA, 10:1 mix

Low-modulus, high-toughness 10:1 methacrylate, even at low temperatures; suited to bonding composites in transport, marine, wind energy and civil engineering.

Use: SMC/FRP and composites (sanded SMC)

Plexus

Plexus MA420FS

2K MMA, 10:1 mix

Variant of the MA420 family with its own TDS (in English) and mechanical values different from MA420; 10:1 methacrylate for structural thin-joint bonding (max. gap 4 mm).

Use: Structural MMA 10:1 (specific use not detailed in source)

Plexus

Plexus MA420W

2K MMA, 10:1 mix

UV-stable white variant of MA420, cited on the official website with its own value sheet.

Use: Visible joints requiring UV-stable white colour

Plexus

Plexus MA422

2K MMA, 10:1 mix

High-toughness 10:1 methacrylate with medium open time, used for bonding composites in marine and transport with minimal preparation; in rail, medium-sized FRP interior parts.

Use: FRP/gelcoat composites

Plexus

Plexus MA425

2K MMA, 10:1 mix

10:1 methacrylate with long working time, widely used for bonding composites in marine and transport with hardly any preparation; rub rails, swim platforms and bus side panels.

Use: FRP/gelcoat composites

Plexus

Plexus MA530

2K MMA, 1:1 mix

Highly thixotropic, tough, low-exotherm 1:1 methacrylate with moderate open time, for composites and metals in small and large structures; medium repairs.

Use: Marine: deck-to-hull, stringers, consoles

Plexus

Plexus MA550

2K MMA, 10:1 mix

Long working time 10:1 methacrylate; the selector describes it as UV-stable white. Old TDS (2018).

Use: Joints requiring UV-stable white colour (selector)

Plexus

Plexus MA590

2K MMA, 1:1 mix

Ultra-long working time, very low exotherm 1:1 methacrylate for large marine structures: stringers and skins with thick bond lines.

Use: Marine: stringers and large FRP areas

Plexus

Plexus MA832

2K MMA, 10:1 mix

Primerless 10:1 methacrylate on aluminium, medium working time and good vibration and noise reduction; rail use.

Use: Unprimed metals (aluminium) and structural foam

Plexus

Plexus MA920

2K MMA, 10:1 mix

Low-odour, high-toughness 10:1 methacrylate cited in the Selector Guide.

Use: Low-odour structural MMA

Plexus

Plexus MA1020

2K MMA, 10:1 mix

Low-odour, low-shrinkage 10:1 methacrylate cited in the Selector Guide.

Use: Low-odour, low-shrinkage structural MMA

Plexus

Plexus MA1025

2K MMA, 10:1 mix

Low-odour, very low shrinkage 10:1 methacrylate designed for thin sheet (stainless < 1 mm) while keeping flatness; rail skirting.

Use: Thin sheet without marking (stainless < 1 mm)

Plexus

Plexus MA3940

2K MMA, 10:1 mix

10:1 methacrylate for crazing-sensitive plastics; a slower version of MA3940LH.

Use: Crazing-sensitive plastics (PC, acrylic)

Plexus

Plexus MA7020

Not documented; non-flammable according to the website

Non-flammable reference with a value sheet on the official website; not present in earlier EMEA documents.

Use: Structural where a non-flammable product is required

Plexus

Plexus MA8120 / MA8120GB

2K MMA, 1:1 mix

Low-halogen 1:1 methacrylate, direct to metal, with medium-to-long working time and higher elongation; bonds galvanised and zinc-treated steels. GB with glass beads.

Use: Unprimed metals: galvanised, zinc, Al, stainless

Plexus

Plexus PU2105

2K PU, 1:1 mix

Odourless, non-flammable two-component polyurethane, primerless on metal and low shrinkage, with high mechanical strength and good resistance to moisture and salt spray.

Use: Unprimed metals and plastics

Plexus

Plexus H4110

2K hybrid, 1:1 mix

Elastic, non-flammable, low-shrinkage two-component hybrid adhesive, primerless on metal; high permanent elongation for joints that must absorb movement.

Use: Unprimed metals, FRP, gelcoat, plastics