StructalitEpoxy for electronics
Structalit 8205
1K modified epoxy with quartz filler (65 %), heat cure
High-Tg, low-CTE underfill with good flow at elevated temperature, for protecting joints under components.
Technical data
| Viscosity | 6.000 mPa·s (Kinexus, 25 °C, 10 s⁻¹) |
|---|---|
| Cure | 130 °C/15 min (P067) |
| Service temperature | −40 a +180 °C |
| Tg (DMA) | 130 °C |
| CTE < Tg | 28 ppm/K |
| Tensile / elongation | 33 MPa / 0,5 % |
| Hardness | Shore D 90 |
| Storage | −20 °C; ≥1,5 months on delivery, max. 3 |
Recommended for: Electronics protection
Need the technical data sheet (TDS) and safety data sheet (SDS)?
Send us your enquiry and we will send you the latest versions, together with a technical expert's recommendation.
Send us your enquiry and we will send you the latest versions, together with a technical expert's recommendation.